• 4-channel analogue input temperature
• CAN protocol: CANopen CiA 404
• Die-cast aluminium casing, protection class IP66
• Indication of device status and errors by two bi-color LEDs
• Sensor break and short circuit detection
• Integrated cold junction compensation (thermocouples)
• Connection of 2-/3-/4-wire sensors (resistance sensors)
The µCAN.4.ti-BOX provides 4 inputs for measuring temperature sensors. Signals of resistance sensors as well as thermocouples may be acquired at a total sampling rate of 400 Hz. Sensor signals are evaluated and linearized within a rugged die-cast casing. The CAN interface supports CANopen and SAE J1939 protocols.
The µCAN.4.ti-BOX digitizes measurement values of temperature sensors and provides these values in “degrees Celsius” at a resolution of 0.1 °C. Module address and bit rate may be adjusted either via dip switch or CAN bus (LSS, CiA 305). Auto bit rate detection is also supported.
Up to 4 measurement sensors may be connected to the module, the sensor type is selected via CAN bus. On selecting the type of sensor the cold junction compensation for thermocouples will be activated automatically.
The digitized temperature values of the µCAN.4.ti-BOX are transmitted via CAN bus. The bit rate of the CAN bus interface is adjustable within a range of 50 kBit/s to 1 MBit/s. A terminating resistor may be activated via a switch in the device. The CANopen protocol of the module complies with the CANopen standards CiA 301, CiA 305 and CiA 404. Both 11 bit identifiers (CAN 2.0A) and 29 bit identifiers (CAN 2.0B) may be used on the process data.
4-channel thermal data acquisition module with CANopen, signal acquisition of J-, K-, N-, T-type thermocouples, Pt100, PT500 and Pt1000 , 16 bit resolution, designed for metric cable glands, connection via screw terminals.
|12.43.705||µCAN.4.ti-BOX / Thermo type K
4-channel thermal data acquisition with CANopen, signal acquisition via thermo plug-in connector type K, CAN and power supply via Sub-D 9 pole connectors.
Configuration tool for CANopen devices.
|90.01.114||Metric cable installation kit for 4-channel field modules.|